Creon

USB Audio-Interface & Monitor Controller

Creon is designed to operate with your Digital Audio Workstation. But you can also do a lot with it as a stand-alone device: plug in an instrument and play. Connect a microphone and sing along.

Mix your own monitor signal with playback or guide tracks from any source. What you are playing is not bad? Turn on the DAW and record it.

 

Recording Channels

  • 2 microphone inputs (XLR)
  • 1 instrument input (TS)
  • 2 balanced line inputs (TRS)

Two channels can be recorded simultaneously.

Playback Channels

  • 2 channels via USB (DAW 1|2)

Analog Inputs (Sources)

  • 2 TRS line input channels (balanced)
  • 2 RCA line input channels (unbalanced)

Digital Input

  • 1 USB

Analog Output

  • Speaker | Main Out (2x XLR, balanced)
  • 1 headphone socket (TRS)

Digital Output

  • 1 USB

Hardware

  • USB 2 audio system
  • High-performance, 32 bit microcontroller
  • 24 bit audio processing
  • 2 input and 2 output channels, up to 192 kHz
  • Sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz
  • Fixed master clock for lowest jitter
  • True 1:1 audio, no sample rate conversion or clock recovery

Software

  • Windows XP/7/8/10, Mac OS X 10.6 or higher, iOS 6 and higher
  • No driver required for Mac
  • USB Audio Class 2.0 compliance (asynchronous mode)
  • Low-latency Windows ASIO and WDM driver
  • Multi-application mode, simultaneous ASIO and/or WDM playback
  • Driver feedback synchronization to hardware clock
  • ASIO control panel for Windows