Performer s800

Stereo Power Amplifier

Line Inputs & Line Outputs

  • Neutrik XLR, balanced, Pin 2 = (+)
  • Input impedance: 10 kohms
  • Input trimming: 0 dB to -5.5 dB in 0.5 dB steps 
  • Input sensitivity: +6 dBu
  • Output impedance: defined by connected device
  • Crosstalk: -110 dB (@1 kHz) 

 

Loudspeaker Outputs

  • 2 pairs binding posts with ø4mm cable hole (screwable) and banana plug; fully encapsulated

 

 Output power

  • 2x 285 W RMS into 4 ohms
  • 2x 185 W RMS into 8 ohms
  • 1x 450 W RMS into 8 ohms in bridge mode 
    •  

 

Output voltage

  • 74 V Peak-to-Peak (stereo)
  • 180 V Peak-to-Peak (bridge)
  • 35 V RMS (stereo)
  • 86 V RMS (bridge)

 

Output impedance

  • < 0.031, 20 Hz to 20 kHz (stereo)
  • < 0.043, 20 Hz to 20 kHz (bridge)

 

Damping factor

  • 300, 20 Hz to 20 kHz, at 8 ohms (stereo)
  • 190, 20 Hz to 20 kHz, at 8 ohms (bridge)

 

Frequency response

  • 9 Hz to 100 kHz +0, –0.03 dB
  • < 9 Hz to 200 kHz +0, –3 dB

 

Signal-to-noise ratio

  • > 118 dB (wide-band, unweighted, referred to full power output)
  • > 123 dB (A-weighted)

 

Gain

  • 26 dB (stereo)
  • 32 dB (bridge)

 

Total harmonic distortion

  • < 0.03 % at 1 kHz, at 185 W, 8 ohms 
  • < 0.19 % at 20 kHz, at 185 W, 8 ohms
  • < 0.011 % at 1 kHz, at 450 W, 8 ohms
  • < 0.12 % at 20 kHz at 450 W, 8 ohms

  

Power Supply

  • Mains voltage (switchable): 230 V AC / 50 Hz or 115 V AC / 60 Hz
  • Fuses: 230 V: T 4 A; 115 V: T 8 A 
  • Power consumption: max 900 VA
  • Idle power consumption: 40 W

 

Dimensions (incl. feet)

  • 278 mm W x 100 mm H x 370 mm D
  • 10.95" W x 3.94" H x 14.57" D 

 

Weight

  • 12.8 kg; 28.2 lbs (unit only) 
  • 14.0 kg; 30.9 lbs (shipping)

 

0 dBu = 0.775 V. Subject to change without notice.