Neos

120V Rail 24-Ch. Summing and Monitoring Console

Inputs & Outputs

  • Electronically balanced instrumentation amplifiers
  • Sockets: Inputs DB25/TASCAM, XLR; Outputs: XLR
  • Input Impedance: 10kOhm balanced; 20kOhm unbalanced
  • Output Impedance: 75Ohm balanced; 75Ohm unbalanced
  • Nominal Input Level: +4dBu
  • Maximum Input Level: › +30dBu (30dBu = limit of measuring equipment)
  • Maximum Output Level: › 24dBu

 

Measurements

  • Frequency Range (-3dB): 10Hz to ›200kHz
  • Phase    1kHz: 0°, 10kHz: -4,5°, 20kHz: -8.30°
  • Common Mode Rejection Ratio: › 60dB (Rec. Out, Insert Send, Monitor A/B)

 

Total Harmonic Distortion

  • 10Hz Rec. Out: 0.0011%, Insert Send: 0.0011%, Monitor A/B: 0.0016%
  • 100Hz Rec. Out: 0,00060%, Insert Send: 0.0009%, Monitor A/B: 0.0016%
  • 1000Hz Rec. Out: 0.00090%, Insert Send: 0.0013%, Monitor A/B: 0.0020%
  • 5000Hz Rec. Out: 0.0032%, Insert Send: 0.003%, Monitor A/B: 0.004%
  • 10kHz Rec. Out: 0.0028%, Insert Send: 0.0018%, Monitor A/B: 0.0027%
  • 22kHz Rec. Out: 0.00054%, Insert Send: 0.00050%, Monitor A/B: 0.0005%

(Generator output 24dBu, inputs terminated with 40dBu)

 

Signal to Noise Ratio (all channels)

  • Rec. Out: 92dBu
  • Insert Send 92dBu
  • Monitor A/B: 88dB

(A-weighted, 22Hz - 22kHz, inputs terminated with 40dBu)

 

Dynamic range: › 122dB

 

Power Supply

  • Linear power supply with toroidal transformer
  • Operational Voltage : +/- 60Volts  (120 Volts)
  • Power Consumption (Standby, 230 Volts/50Hz): 0.420A, 75W, 97.8VA
  • Fuses: 230V AC/50Hz: 315 mA; 115V AC/60Hz: 630 mA
  • Voltage Selector: 115V/230V

 

Dimensions and Weight

  • Front panel including rack brackets: 19"/7U (483 x 310 mm)
  • Front panel without rack brackets: 440mm
  • Housing (W x H x D): 483 x 235 x 330mm, depth incl. sockets: 355mm
  • Weight: 14.1kg/ca. 31.08lbs
  • External Power Supply: W x H x D 154 x 67 x 236mm, weight: 3kg/6.61lbs

 

0 dBu = 0.775 V. All measurements at unity gain.

Specifications are subject to change without notice.